Audi Logo Black Rings BACK - A1 A3 A4 A5 A6 A7

Original "Black Edition" black rings for the tailgate on many newer Audi models - replace the original chrome rings with this beautiful glossy black logo.

Original part from Audi - avoid the classic irritations of painting the original logo - that the chrome can be seen through marks and stone chips, this logo is "through-colored" black with a high-gloss finish.

The rings are mounted with pre-attached double-sided tape that is included with delivery.

Dimensions:
20.1cm x 7

Fits almost all newer Audi models and has been tested on the following models:
Audi A1 8X (incl. S1) model year 2010-2019
Audi A1 (GB) model year 2019+

Audi A3 / S3 (8V) model year 2013+ and onwards (all models incl. RS)
Audi A3 8Y model year 2020+ and onwards (incl. RS models)

Audi A4 / S4 (B8 8K) incl. Avant RS and Quattro models
Audi A4 / S4 (B9 8W) incl. Avant RS and Quattro models

Audi A5 / S5 (B8 8F 8T) incl. Sportback, Coupe and Cabrio as well as RS models (Check if the logo is flat or curved!)

Audi A6 (C7 4G) Limousine / Avant model year 2011-2018

Audi A6 (C8 4A) Limousine / Avant model year 2019+

Audi A7 (C8 4K) Sportback model year 2019+

Audi A8 D4 model year 2010-2013

Audi Q3 8U model year 2012-2018
Audi Q3 F3 model year 2019+ and onwards (NOT Sportback)

Audi Q5 8R model year 2013-207
Audi Q5 8Y model year 2017+ and onwards

Audi Q7 4L model year 2010-2015

Audi Q8 e-tron (GE) model year 2024+

Audi R8 42 model year 2007-2015

Audi e-tron GE (VIN: K4H) model year 2019-2023

NOTE: Please check the "curvature" on the tailgate - this logo is completely flat, if the original curves or bends - then this logo CANNOT be used on the car - if your original rings are not 100% "flat" please contact us, and we will find the correct one. Generally, Sportback models have logos with "curvature" and here the flat logos will not fit.